The CUS250 power supply series offers the right solution for every cooling concept. TDK-Lambda’s new CUS250 series AC-DC power supplies provide 250 W of output power despite a small footprint of 50.8 x 101.6 mm (2 x 4 inch) and are certified to both IEC 60601- 1 and IEC 62368-1 for Class I and Class II (double insulated) installations. Different unit versions and cooling concepts allow flexible integration into target applications from the industrial, laboratory and medical sectors. In this...

TDK Corporation announces the introduction of 20 U high, 19-inch rack cabinet high power solutions to the TDK-Lambda GENESYS+™ series of programmable DC power supplies. The configurable GSPS series can provide 30 kW, 45 kW or 60 kW of output power with seamless transition across constant voltage, constant current, and constant power limit operating modes. The cabinets are mounted on lockable castors (wheels) to enable them to be easily repositioned around research or production facilities.

TDK Corporation announces the introduction of 12 V and 48 V output models to the TDK-Lambda brand PFH500F series of high-efficiency AC-DC power modules. The series, rated at 504 W, can be conduction-cooled to a cold plate for outdoor applications.

TDK Corporation has expanded its product range with two new DC-DC converters with 1.5 W and 3 W power from the TDK-Lambda CCG series. These converters are capable of providing full load in ambient temperatures from -40 to +85 °C with convection cooling. In addition to battery powered equipment, applications include process control, data communications, telecommunications and test or measurement related products.

TDK Corporation announces the introduction of the 750 W rated TDK-Lambda i7A series of non-isolated buck DC-DC converters, packaged in the industry-standard 1/16th brick footprint. The output voltage of these 24 V nominal input step-down converters can be adjusted from 3.3 V to 18 V with a maximum current of 45 A. However, since the i7A is a step-down converter, the input voltage must always be at least 4 to 6 V higher than the desired output voltage.

DC-DC converters are used in many applications; telecom, data communications, test and measurement, process control, semiconductor fabrication, industrial manufacturing, medical devices and battery powered equipment. They offer a simple way of deriving additional low power outputs from a higher power AC-DC supply, for example a 24 V output driving motors, relays or pumps. Alternatively if the system is powered by a 12 V battery, DC-DC converters can provide stable, regulated voltages during the...

Supercapacitors may be combined with batteries to add the advantages of high capacity and low internal resistance. Low leakage currents will extend battery life in this application. HY-LINE Power Components now offers a new model optimized specifically for this use case.

New TDK Lambda KPSB series in cost-effective protection Class II with 5 to 25 W and wide operating temperature range. TDK Corporation announces the introduction of the KPSB6 series of 5 to 6 W and the KPSB25 series of 20 to 25 W board mount AC-DC power supplies. Certified to the IEC 62368-1 standard for Audio/Video, Information and Communication Technology Equipment, the products have a Class II input requiring no earth ground.

Weidmüller Klippon® Connect terminal blocks AITB for building installation. The requirements for building installations are manifold: Energy efficiency and safety are among them, as are flexibility and convenience, to name only the most important. The necessary infrastructure in a building requires numerous main, sub-distribution and small distribution boards as well as meter cabinets. What they all have in common is that they must accommodate very many functions in a very limited space.

TDK-Lambda expands the TPS series with a power supply unit with 48 V, 83.3 A and 4 kW output power. The TPS4000-48 operates from an industrial three-phase input. It can automatically run from 400, 440, or 480 Vac nominal delta or WYE inputs, without wiring changes or the need for large, costly step-down transformers.

TDK Corporation announces the introduction of the TDK-Lambda brand DDA series of DIN rail mounted DC-DC converters up to 500 W output power. The DDA series use TDK Lambda Point-of-Load converters of the i6A series without galvanic isolation.

Fully networked systems with intelligent sensors and actuators place extremely high demands on the power supply. Applications in the manufacturing industry, process engineering or wind farms all have one thing in common: they need a reliable power supply for their controllers, sensors and actuators. To meet this need Weidmüller has developed modular, communication-enabled power management solutions in a range of performance classes.

No matter if it’s a flashlight or a Tesla: They don’t work without a battery. maxon recently started a small but excellent workshop for manufacturing lithium-ion battery packs.

Within about a year, TDK Corporation rolled out the new generation of its programmable power supply series TDK-Lambda GENESYS+™ and once again set new standards. In particular, the introduction of state-of-the-art DSP technologies (Digital Signal Processing) offers many new possibilities that the new GENESYS+™ power supplies translate into practical user benefits, such as doubling power density through higher efficiency (up to 92 percent), new functions such as arbitrary generator, internal...

TDK Corporation announces the introduction of the TDK-Lambda brand EZA11K‑320240 bi-directional DC-DC converters, suitable for use with energy storage systems. Rated at 11 kW, this 1U high product will operate off a 240–400 Vdc source from a high voltage grid and provide 150 – 300 Vdc for charging lithium ion batteries.

With a maximum output power of 5 kW in a 1U-19-inch rack-mount housing, the first member of the new generation of TDK Lambda's successful laboratory power supply family GENESYS+™ sets new standards in the power supply market. The new series delivers the highest power density currently available on the market in a 1U-19-inch rack weighing less than 7.5 kg.

The configurable XMS500 series of AC-DC power supplies from TDK Corporation offer both Class I and Class II (double insulated) construction. All models are compliant to curve B radiated and conducted EMI, with more than 6 dB margin, yet maintain a leakage current of less than 150 µA.